Re: DIN Rail Boxes

[adrian.lucas@xxxxxxx]

I should have added that I think you will need to change your wall swit=
ches to momentary type otherwise X10 will not be able to control the fi=
tting when it's turned on by the switch.  Perhaps someone else can conf=
irm this?

Adrian Lucas
E-mail:       adrian.lucas@xxxxxxx





ukha_d-return-1186-lucasda=3Dprl.research.philips.com@xxxxxxx=
om on 05/11/99 11:05:40
Please respond to ukha_d <ukha_d@xxxxxxx> @ SMTP=20
To:	ukha_d <ukha_d@xxxxxxx> @ SMTP
cc:	=20
Subject:	[ukha_d] Re: DIN Rail Boxes
Classification:	Restricted
Dimensions of LD 10 (in mm) are:

51 width
71 depth (incl 6mm for fuse)
80 height

You will need to allow extra on the height for the cables.  It might be=
nice to leave the fuse sticking out in which case you need a 15mm diam=
hole and the depth reduces by 6mm.  You might have to allow space for =
a junction strip as well because the
existing wires probably won't be long enough.  Under the floor is a pos=
siblility but you need easy access to change the fuse which may blow wh=
en the bulb fails.  If you don't need dimming then the AD10 is smaller =
(35 X 66 X 80) and doesn't have a fuse.

Another alternative which could be easily removed is the LW10U though o=
nly suitable if you have one light switch per box.


Adrian Lucas
E-mail:       adrian.lucas@xxxxxxx





Nigel Orr <nigel.orr@xxxxxxx> on 28/10/99 12:16:05
Please respond to ukha_d <ukha_d@xxxxxxx> @ SMTP
To:	ukha_d <ukha_d@xxxxxxx> @ SMTP
cc:=09
Subject:	[ukha_d] Re: DIN Rail Boxes
Classification:	Restricted
At 11:00 28/10/99 +0100, you wrote:
>Nigel, I like your ceiling rose idea,

Perhaps the most appealing part is that if we move, it would be easy to=

revert the house to 'normal'.  Similarly, when I get a 'round tuit' and=

start my own controller prototypes, it would be easy to change.  Normal=

ceiling roses are actually surprisingly large, so I don't think a DIN-s=
ized
box would be too unacceptable.  It also has the advantage of keeping th=
e
wiring standard, and the switch drop short (IIRC, Mark had some problem=
s
with long switch drops on an LD10)

The other alternative is to pop up a floorboard above and fit it there,=
but
I thought I'd try for another box first.

> take a look at the Klik range of

I've used those, actually for ceiling mount speakers in a previous job.=

Very neat, very handy, but ISTR there wasn't much room inside.  I haven=
't
seen any dimensional info for the LD10 parts, anyone got any pointers?

BTW, I should make it clear that my buying some X10 kit doesn't change =
the
fact that I don't like it as a concept, in case you're all thinking I'm=

converted.
;-)

Nigel
--
Nigel Orr                  Research Associate   O   ______=09
Underwater Acoustics Group,              o / o    \_/(
Dept of Electrical and Electronic Engineering     (_   <   _ (
University of Newcastle Upon Tyne             \______/ \(

-----------------------------------------------------------------------=
-
Java or juggling?.  Everybody learns something at Learn2.com.  Where
you'll find thousands of free 2torials, affordable online courses, and
useful tips for everyday life.  http://clickhere.egroups.com/click/964


eGroups.com home: http://www.egroups.com/group/ukha_d
http://www.egroups.com - Simplifying
group communications








-----------------------------------------------------------------------=
-
Imagine a credit card with a 0% Intro APR and Instant Approval?
It seems impossible, but it?s not. Visit GetSmart.com?s Credit Card
Finder and click on instant approval cards right now at
http://clickhere.egroups.com/click/1263


-- 20 megs of disk space in your eGroup's Document Vault
-- http://www.egroups.com/docvault/ukha_d/?m=3D1





=

------------------------------------------------------------------------
Click on Instant Credit Card Approval at
http://clickhere.egroups.com/click/1265

-- Talk to your group with your own voice!
-- http://www.egroups.com/VoiceChatPage?listName=3Dukha_d&m=3D1