The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Options for TouchScreen Display


  • To: <ukha_d@xxxxxxx>
  • Subject: Re: Options for TouchScreen Display
  • From: "Quinten Uijldert" <yahoogroups@xxxxxxx>
  • Date: Thu, 15 Nov 2001 09:20:37 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • References: <53B72E3311AAD211B7E400105A31A1C11369FC@xxxxxxx>
  • Reply-to: ukha_d@xxxxxxx

Ok, here's the low-down of my top-secret project ;-)

I fell in love with the Epods when I saw them, but being the poor underpaid
engineer I am, I thought what if I could make something similar?

Luck smiled my way as I had an old IBM ThinkPad 370C lying about which was
old and damaged on the hinges (couldn't open/close it anymore), but still
functioning fine (even running Windows 98).

So I thought, what if I get myself one of these:
http://www.maplin.co.uk/products/details.php?cartid=0&moduleno=1728
and fit
the components (i.e. cpu, floppy, etc) inside, and put the display on the
outside; voila, a tablet pc.

Surprisingly enough, the laptop's internals are dead-easy to handle, and it
consists of basically 2 self-contained units: the lcd display and the
processor unit. The connection between them are 2 (very) flat cables and 1
tiny power (I presume) cable.

The only problem I could foresee is controlling it as this laptop doesn't
have a touch-screen and buying an overlay would be a bit OTT. Then on one
of
the many overclocking sites I spotted an ad of someone selling a mouse
touchpad which caused a bright light to shine above my head. The solution
has been found!

So the finished product will be a tablet-pc hanging on the wall which is
controlled by the touchpad (i.e. there will be no keyboard).

Hope this helps,

Q.

----- Original Message -----
From: "Pedro de Oliveira" <oliveirp@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, November 15, 2001 9:03 AM
Subject: RE: [ukha_d] Options for TouchScreen Display


> Quinten
>
> Although I understand what a mouse touchpad is, I can't figure out
what
you
> mean by "the display" and how will this make it more
useful??  I assume
you
> have a reason for doing this as apposed to just doing it because you
can
;-)
>
> Pedro de Oliveira
>
> -----Original Message-----
> From: Quinten Uijldert [mailto:yahoogroups@xxxxxxx]
> Sent: 15 November 2001 08:36
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Options for TouchScreen Display
>
> Although it is not quite the same, I just bought (haven't got it yet)
a
> mouse touchpad (as in the ones you find on laptops) which measures
about
4x4
> inch. It will hook up to the serial/ps/2/usb port of a laptop which is
going
> to be refitted into a new casing so the display faces the outside.
>
> Q.




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.