RE: OT ATI AIW Radeon

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Also forgot to say, I have 6 CCTV cameras connected at the moment and use a
bit of VB to switch between them and it is only 1 camera that has this
problem, think I will look harder for a solution, it is not the camera as I
made an adaptor so I can connect the cameras into the TV if I wish and it
is
okay there.

I don't doubt it is something I have done!

B.

-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 03 December 2001 00:49
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] OT ATI AIW Radeon


Shows how much I know......I do not think the card I had was a Win-TV but I
only had it a short while!

The resolution I could get with the Compaq's built in graphics card was
lowwwwww and I could not find any upgrade drivers, after all it is a
server!
therefore I thought I would have to go for a combined graphics/TV tuner
card.

Oops, just read my build notes and it was a Win-TV Card!!!! good job I am
now on leave for a week and a half, as I need a rest ;-))

I need TS so I shall have to think of something!

I currently have installed:-

ATI AIW Radeon
Smart 2DH Raid Controller
C-Labs Live Value Sound Card
Adaptec 2940 Ultra-wide SCSI card
3Com 3C905C Network Card (for my cable modem)
Equinox SST-8P Serial Adapter

I also have:-
Meteor		Com1
CCTV Switcher	Com2
HVision		Com3
UPS			Com4
Com5 to Com10 Spare!

Hence no space! Busy little server aint it?

I also wanted to fit an ordinary modem but I will only do that if
necessary.

Take care,

B.

PS sorry for the delay replying been watching Desperate Measures, good
film.


-----Original Message-----
From: Des Gibbons [mailto:des@xxxxxxx]
Sent: 02 December 2001 22:57
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] OT ATI AIW Radeon


The Win-TV card is by Hauppage :/

I don't understand what you mean by resulution problems? Do you mean you
couldn't capture at full TV resolution at a high enough frame rate?

The Brown hue and lines across the screen do not sound healthy? Have you
tried using a different composite source for testing?

The wintv card is a tuner only, no vga output, so no use to you if slots
are
at a premium.

Des

> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> Sent: 02 December 2001 17:46
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OT ATI AIW Radeon
>
>
> It was a ?50 (ish) Haupage card, just a capture card no graphics which
is
> why I bought the AIW.
>
> Lack of PCI slots as usual!
>
> Just set the card to composite and it has a brown hue and lines
> going across
> the screen! the Haupage did not do this but the AGP version of
> the AIW card
> I have in my other PC also did this at some stage! never used too
cannot
> remember when it started, thought it was the card as the Haupage
> worked but
> now not sure!
>
> What is the Win-TV card like, I have seen them for sale but I think it
is
> only a TV card? this might give me the resolution problems I had with
the
> Haupage card?
>
> Maybe try one of these and an extra PCI card would be good but I
cannot
> think of anything I can remove!
>
> Ho Hum, the joys of our hobby!
>
> B.
>
> -----Original Message-----
> From: Des Gibbons [mailto:des@xxxxxxx]
> Sent: 02 December 2001 17:40
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OT ATI AIW Radeon
>
>
> I can safely say I would never have diagnosed that one easily :)
>
> What was the cheapy card you tried previously, i have a win-tv pci
here if
> you wanted to try it?
>
>
> Des
>
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 02 December 2001 17:31
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] OT ATI AIW Radeon
> >
> >
> > Yup ATI are right, YOU CANNOT USE A ATI AIW RADION VIDEO CARD
> > WITH TERMINAL
> > SERVICES RUNNING!
> > Bollocks!
> >
> > I will see what ATI have to say!
> >
> > Oh and yes the card is now working now I have uninstalled TS!
> >
> > Bugger,
> >
> > Thanks for your help guys.
> >
> > B.
> >
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 02 December 2001 17:17
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] OT ATI AIW Radeon
> >
> >
> > I have installed the following:-
> > DirectX 8.1
> > Video update dx80bda.exe, says it installed satis,
> > ATI drivers w2k_radeon_5_13_01_3276.exe.
> >
> > I have been looking around the ATI site and have been filling in
> > a customer
> > response/technical support form, well written BTW, and one of the
> > lines says
> > you cannot run Terminal Services on the same machine as ATI AIW
> cards? if
> > this is so they will be getting the card returned!
> >
> > I might try uninstalling TS to see what happens?
> >
> > B.
> >
> > -----Original Message-----
> > From: Des Gibbons [mailto:des@xxxxxxx]
> > Sent: 02 December 2001 17:10
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] OT ATI AIW Radeon
> >
> >
> > The video update is only for dx8.0, i think dx8.1 already has
> it built in.
> >
> > What version of ATI drivers are you using? Did you download the
current
> > version from the ATI website?
> >
> >
> > Des
> >
> > > -----Original Message-----
> > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > Sent: 02 December 2001 16:46
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] OT ATI AIW Radeon
> > >
> > >
> > > I have now downloaded the Video upgrade, no joy so far but I
will
> > > re-boot to
> > > see what happens.
> > >
> > > In control Panel there is a ATI utility which I just ran to
see
> > > what it does
> > > and it checks my system, it raised 2 problems, 1 DVD failed,
I do
> > > not have a
> > > DVD drive!, and 2 CPU speed, I have dual 200MHz Pent Pro
> CPU's, it says
> > > 300MHz or grater, should still work though?
> > >
> > > B.
> > >
> > > Just noticed my last email has not come through yet!
> > >
> > > -----Original Message-----
> > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > Sent: 02 December 2001 16:13
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] OT ATI AIW Radeon
> > >
> > >
> > > Des, I have downloaded and installed DirectX v8.1 made no
difference.
> > >
> > > As for DX8 video upgrade, afraid I do not know what that is?
so I
> > > guess that
> > > is a no?
> > >
> > > I'll have a look, just downloading a 10MB file from ATI to
see if
> > > that will
> > > work.
> > >
> > > I also ran the Windows Update utility and all is well from
there.
> > >
> > > B.
> > >
> > > -----Original Message-----
> > > From: Des Gibbons [mailto:des@xxxxxxx]
> > > Sent: 02 December 2001 16:09
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] OT ATI AIW Radeon
> > >
> > >
> > > Do you have dircet X 8, and the DX8 video upgrade installed?
> > >
> > > Des
> > >
> > > > -----Original Message-----
> > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > Sent: 02 December 2001 15:59
> > > > To: Ukha_D
> > > > Subject: [ukha_d] OT ATI AIW Radeon
> > > >
> > > >
> > > > Can anyone help before I send this card to the bin!
> > > >
> > > > I have just bought this card for my Compaq Proliant
2500, it is
> > > a PCI card
> > > > as the server does not have a AGP slot.
> > > >
> > > > I cannot get the card to load its driver, I have
disabled
> the onboard
> > > > graphics card uninstalled and re-booted and
reinstalled, nothing.
> > > >
> > > > I looked on the ATI web site and have installed the
latest
> > > DirectX driver
> > > > still nothing!
> > > >
> > > > The graphics are fine, all other ATI programs work fine
just not
> > > > the TV part
> > > > which as luck would have it is the only bit I want!!!!
composite
> > > > for my CCTV
> > > > switcher.
> > > >
> > > > A cheap TV card I had bought before worked fine apart
from I
> > > > could not get a
> > > > good resolution hence the new AIW card!
> > > >
> > > > When I try and launch the TV part it comes up with
"The TV player
> > > > failed to
> > > > initialise the video", if I go into Add/Remove
programs it has an
> > > > entry "ATI
> > > > Display Driver" but does not have any size/date
entry which to me
> > > > indicates
> > > > the driver is not loading!
> > > >
> > > > Can any of you advise me as to what to try next?
> > > >
> > > > B "fed up, fix one thing another fails"
> > > >
> > > >
> > > > For more information: http://www.automatedhome.co.uk
> > > > Post message: ukha_d@xxxxxxx
> > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > List owner:  ukha_d-owner@xxxxxxx
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/