|
Trying to get
my
head straight on this (still)
And I have
looked a
most of the wiring guides mentioned in this
group.......
Can someone
have a
look and make sure I've got this right........
- An LD11 DIN Rail
module sits in a standard consumer unit.
- The mains comes
>from
switch.
- The live to the
light comes from the LD11 and the Neutral comes from the X10 consumer
unit.
- The (momentary)
light switch live comes from the X10 consumer unit, the neutral comes from
the
LD11.
- They will work
without any X10 interface and will just switch on/off, dim from the
switch.
- When using an
X10
interface such as with comfort, the interface sits before the first X10
consumer unit.
- The X10
interface
can sit anywhere on the mains and control the X10
devices.
- If I have
upstairs
and downstairs on different MCB's in the house consumer unit then I would
need
more than one X10 interface.
- I can control a
series of say 6 mains halogen lights as long as I don't go over
700watts.
Sorry for being a bit long winded but don't want to
mess
it up.
Cheers
Neil
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|