The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: CCTV


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [OT] Gateway Monitor Repair


  • To: ukha_d@xxxxxxx
  • Subject: RE: [OT] Gateway Monitor Repair
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Fri, 23 Nov 2001 13:14:52 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

This'll make you cry.....

I've sat here and watched as about 600 monitors (of various vintages, but
about half those were 17" Compaq ones), have been carried (very
roughly)
past my desk, and thrown (equally as roughly) into the back of a lorry, to
be taken away and "disposed of" over the last 5 weeks...

All serial number recorded unfortunately, so no chance of
"diverting" any of
them into the boot of my car... :-(


Paul G.





>From: "Keith Doxey" <ukha@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: RE: [ukha_d] [OT] Gateway Monitor Repair
>Date: Fri, 23 Nov 2001 12:34:08 -0000
>
>Who told you that?
>
>A computer shop or a TV repairer.
>
>A good TV repair shop should be able to source a transformer if they
are
>still available from other sources (might be pattern parts available).
>Failing that you have no hope. Probably not cost effective anyway.
>Transformer will probably be more than a tenner and labour charges of
>£35-£40 per hour. That'll set you back half the cost of a new 17"
monitor
>and you will have one that is two years old.
>
>sad but true unfortunately.
>
>Keith
>   -----Original Message-----
>   From: Mark McCall [mailto:mark@xxxxxxx]
>   Sent: 23 November 2001 12:17
>   To: ukha_d Egroup
>   Subject: [ukha_d] [OT] Gateway Monitor Repair
>
>
>   We’ve just been told that one of our 17” Gateway monitors is not
able to
>be repaired because a replacement “fly-back transformer” is no longer
>available.  The monitor is only two years old and it seems a shame just
to
>dump it like this.
>
>
>
>   Anyone know where I could try for the part before writing it off?
>
>
>
>   Thanks
>
>
>
>   M.
>
>
>
>
>
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>   For more information: http://www.automatedhome.co.uk
>   Post message: ukha_d@xxxxxxx
>   Subscribe:  ukha_d-subscribe@xxxxxxx
>   Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>   List owner:  ukha_d-owner@xxxxxxx
>
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>


_________________________________________________________________

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.