The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Kinda OT: W2K server start probs


  • To: ukha_d@xxxxxxx
  • Subject: Re: Kinda OT: W2K server start probs
  • From: keith@xxxxxxx
  • Date: Fri, 23 Nov 2001 11:42:40 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Event id 6006 is simple - it is the Event log service stopping. When
you shut down Windows, this is done by default, so if you clear the
event log before restarting you will always get this at/near the top
of the event log.

Event id 7022 is a little less specific. This message indicates that
a specific service attempted to start but hung. It is a Service
Control Manager message and not a message from the application or
service that did not start. Look for more errors from the application
or service itself in order to troubleshoot this problem. The message
will contain a service name: the <service name> service hung on
starting. Check for more errors derived from the service...

If you can, it might help to post here or email me the whole text for
7022.

Cheers,

Keith

--- In ukha_d@y..., "John Hill" <jhill1@n...> wrote:
> It's only sort of OT as use this machine to run HS as well.
>
> The problem I keep getting is on machine start up, a message saying
one or
> more services or drivers failed.
> When I look at the event viewer, it shows one for eventlog( event
6006), and
> 2 errors relating to Service Control Manager (event 7022).
>
> When the machine was built at Phil's place we had this after
loading the
> Lynksys config utils. But these are not loaded anymore since (a pre
linksys
> image was reloaded using Ghost).
>
> I have been using the machine for a while now, and this problem
doesn't seem
> to occur until several days usage have passed. When It does start
it remains
> until I use Ghost to reload the disk image again, and carry on
round & round
> the same old circle.
>
> I've tried loading any combination of software to see if it is
anything in
> particular that triggers this, but it doesn't seem to make any
difference.
>
> Anyone out there (in here) have any suggestions what it might be?
>
> cheers
>
>
> John


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.