The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Labelling Cables - an alternative algorithm


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: NTL Broadband queries


  • To: ukha_d@xxxxxxx
  • Subject: RE: NTL Broadband queries
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Wed, 21 Nov 2001 11:58:26 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I Plan to set it up in the following way initially...

House LAN-----Proxy server-----Draytek Router-----Cable modem-----NTL
network

So the CM will talk to one interface in the router. Later on I will change
the bit from the router in.... (Put a "proper" firewall in
place), but I
envisage that the router will always be the interface to the CM....

Paul G.





>From: "Paul Smith" <wheelbarrowhandle@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: RE: [ukha_d] NTL Broadband queries
>Date: Wed, 21 Nov 2001 11:41:18 -0000
>
>Paul,
>
>	Not sure of your setup, but the CM only talks to one MAC address
>at a time, so be sure to use the network card that you want to face the
>outside to set it up. Otherwise you have to wait an hour or so before
>the modem will talk to a different MAC address.
>
>Paul
>
>
>
> > -----Original Message-----
> > From: Paul Gordon [mailto:paul_gordon@xxxxxxx]
> > Sent: 21 November 2001 11:28
> > To: ukha_d@xxxxxxx
> > Subject: Re: [ukha_d] NTL Broadband queries
> >
> > >
> > >The only problem that I've had with the modem is via the USB
>connection.
> > I
> > >always turn all of my equipment off at the mains. When
turning back
>on
> > you
> > >need to wait until the modem has gone on-line before turn the
>computer
> > on.
> > >I've now moved to the ethernet connection and don't have to
do this
> > >
> > >
> > >
> >
> > I'm definately getting ethernet presentation, so fingers
crossed...
> >
> > Paul G.
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>


_________________________________________________________________

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.