The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: [KAT5] KAT5 Power over Ethernet


  • Subject: RE: [KAT5] KAT5 Power over Ethernet
  • From: "Tony Butler" <lists@xxxxxxxxxxxxxxxxx>
  • Date: Thu, 11 Nov 2004 11:54:25 -0000


G., you can get these splitter leads from, I think craplin, which will
split
the output into 4 or 5, all with the correct termination for a KAT5 unit.
One thing you have to watch though is if it's fully loaded, make sure to up
the voltage to 12v - I thought I'd buggered some of my units when I was
getting sound but a dodgy picture with no colour and/or it rolled all the
time - then I remembered I'd added another unit onto one PSU and the
voltage
was still set to 9v.

Leads are about 3 quid a piece.  Dunno the stock code though, soz.

Hth,

Tony

> -----Original Message-----
> From: theboyguk5 [mailto:ukha_d@xxxxxxx]
> Sent: 11 November 2004 09:06
> To: kat5-users@xxxxxxx
> Subject: [KAT5] KAT5 Power over Ethernet
>
>
>
> Keith
>
> Following on from the post in ukha_d where I eluded to
> relocating the power for the KAT5 units into Node 0 (by
> modifying and patching a specific lead) - big question is, is
> there a method where we can condense the PSUs, so we dont
> have to have 1 PSU per KAT5 box ?
>
> Could you see a solution to use as little PSUs as possible to
> deliver the power to X number of KAT5 units ? If I do
> relocate the power, then I can dramatically cut the number of
> sockets used.
>
> G.
>
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> $9.95 domain names from Yahoo!. Register anything.
> http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/26EolB/TM
> --------------------------------------------------------------
> ------~->
>
> Searchable KAT5 archive can be found at
> http://www.ukha-archive.com/
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>





KAT5 Main Index | KAT5 Thread Index | KAT5 Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.